...and now you can mix any of the available colors!

The Medium Drink Holder features:

• A flexible, expandable drink holder with 'fingers' designed to grip and hold a wide range of cup & bottle sizes.

• The holder snaps tightly into place so it won't pull out when you remove your drink.

• The medium drink holder can easily be removed when you need a deeper opening for taller drinks. 

~Finally, a built-in way to hold your drinks upright.

 

The Bin and Lid features:

• A storage bin that can hold a phone or mp3 player, a small camera or GPS, sunglasses, wallet, snacks, etc.

• The bin features a lid that snaps tightly shut.

• The lid can also be locked with a mini luggage lock, (not included but can be found in many dept. stores).

• The underside of the lid has a designated space to write in your personal GENUINE® Roadside Assistance serial number if you desire.

• It also has the GENUINE® Roadside Assistance phone number cast onto the lid for your convenience, -even though you'll probably never need it.

• A small weep hole has been added to the bottom of the bin in the event rain water ever gets in.

• The bin can be quickly and easily removed for cleaning or if you just want to take it and your possessions with you. Just pull up on the lid or the bin to remove it. Clean it and then push it back down into the tray.

• Small objects can be stored or hidden under the tray and easily retrieved. Since the bin itself isn't held in place by screws it can be lifted out in seconds to get to your possessions underneath.
  Suddenly need those sunglasses you've stored underneath the tray? No problem! A stop at a red light is more than enough time to remove the bin, take out what you need from underneath and replace the bin.
  
  ~I keep a pair of sunglasses, mechanic's gloves, 2 bungee cords, a small knife, 2 small adjustable wrenches, several wet-naps, a rain poncho and a tire pressure gauge hidden under there. Really!
  
  

The Tray features:

• We have added a small upright 'wall' to the left side of the tray behind the drink holder. This was designed to help keep your possessions from bouncing out of the scooters front-left recessed area.
  ~I find it's the perfect place to hold a soft cloth. It never vibrates out but is easy to get to.

• A small slot has been added to the extreme right side of the tray. The reason?
  You now have the option of also attaching a larger holder for those big-sized cups. We recommend a Bell Brand cup holder -sold at many major dept. and drug stores.
  ~I use mine to hold a fuel bottle for those extra-long rural rides.
  
  
  
  
  
  Love the GEN-U-BIN but want to keep using the scooter's front hook?
  
       Simply cut off the GEN-U-BIN's upright support.
  
   
  Other details:
  

• Made of durable polypropylene, the finish has the same sand-blasted texture of the scooter's original inner panel.

• All pieces have tested dishwasher safe, (air or towel dry).

• Designed only for the Genuine® brand, it looks like it's really part of your scooter - not a universal-fit add-on.

• If you decide to use the scooter's original front hook you will have to cut off the GEN-U-BIN's upright support. This is easily done with a knife or scissors. Some customers have bent the upright support downward and then pushed it into the bin when installing, (but we don't recommend that method).

• If you cut off or bend down the support your GEN-U-BIN will only be held in place by the 2 front screws. They hold quite well but please re-check the tightness of the two screws occasionally. Do not over-tighten.

• The tray is secured in place by the original bolt that holds the front hook onto your scooter, (unless you decide to cut off the upright support to use the original hook), and also by the (2) included stainless steel screws and polypropylene clips.

• No drilling or permanent alterations to your beloved scooter when you install the GEN-U-BIN!

• Installation instructions are included with every GEN-U-BIN. It easily installs in minutes.
  Visit our ' Install It 'page to see how easy it is!